Installing Batteries - Epson PhotoPC 600 User Manual

Installing Batteries

Your PhotoPC 600 comes with four AA (LR6) alkaline
batteries. Make sure the camera is off, and follow these
steps to insert the batteries:
1. Turn the camera upside down with the lens facing you.
Push the battery cover lock down and slide it to the
right, then open the cover.
battery cover lock
Getting Started
1
2
2. Insert all four batteries into the compartment,
positioning the + and - ends as shown below.
3. Close the battery cover and make sure the lock snaps
into place as shown below.
1
15