Taking Pictures From Your Computer - Epson PhotoPC 600 User Manual

Selecting the image quality setting
Use the arrow beside the Mode list to select the following
settings:
Standard (640 x 480 pixels)
Fine (1024 x 768 pixels)
Super Fine (1024 x 768 pixels)
Monochrome Fine (1024 x 768 pixels)
Monochrome Super Fine (1024 x 768 pixels)
You can switch freely between these settings and mix
pictures of varying image quality in the camera. Keep in
mind that the camera's picture capacity will vary
accordingly. See page 28 for more information on the
image quality settings.
Selecting the flash mode
You can use the arrow beside the Flash list to select the
following settings:
Off
Automatic
Forced
See page 29 for more details on the flash modes.
Using PhotoPC 600 with Your Computer
Setting the self timer
Click the Self Timer check box to activate the self timer.
See page 29 for more information on using the self timer.
Selecting macro mode
Click the Macro check box to select macro mode. See
page 30 for details on the macro mode.

Taking pictures from your computer

When the camera is connected to your computer, you
can take pictures and use PhotoPC 600 features through
the EPSON Photo!2 software on your computer. The only
control you can use on the camera itself is the power
switch.
When you take pictures from your computer, you can use
the camera's viewfinder to set up your shot, or you can see
a live preview of the shot on your computer screen before
you capture it. This live preview feature works something
like a video camera, except that the image moves more
slowly. See the next section for details on using the live
preview feature.
3
53