Table of Contents
Advertisement
Macintosh Computers
Macintosh with 68040 or Power PC processor
Serial port and a communication speed of 19200 bps or
higher
8MB RAM
Hard disk drive with at least 30MB free space
Monitor with minimum resolution of 640x480
Macintosh System 7.1 or later (System 7.5 or later is
required to access optional CompactFlash Card memory
directly from the Macintosh)
Safety Instructions
Read all of these instructions and save them for later
reference. Follow all warnings and instructions marked
on the camera and its options.
To reduce the risk of electric shock, do not remove
the cover of the camera or any of its options and do
not open any compartments except as instructed in
this User's Guide.
Do not insert objects through any openings.
Introduction
To prevent fire or electric shock, do not expose the
camera or its options to rain or moisture.
To prevent fire or explosion, do not use the camera
where inflammable or volatile gas is stored.
Do not use outdoors during a thunderstorm.
If the camera or any of its options shows unusual
signs such as noise, odor, or smoke, stop using it and
turn the camera off immediately. Remove the
batteries and/or disconnect the AC adapter, and
unplug the AC adapter from the electrical outlet.
Do not use harsh or abrasive cleaners. Wipe off dust
with a clean, dry cloth.
To avoid damage to the optics of the camera, do not
expose the lens to direct sunlight for extended
periods of time.
Handle the camera gently and avoid subjecting it to
strong shocks or vibrations. If the camera is dropped
or otherwise jarred, the following errors may occur
even if the camera is not permanently damaged:
The camera's date and time settings may be lost.
If the camera is jarred while processing an image,
the camera may fail to record the image in its
memory.
i
9
Advertisement
Table of Contents
