Table of Contents
Advertisement
An error message appears when you are using
EPSON Photo!2 with the camera connected to the
computer.
Make sure the cable is connected correctly, as described
on page 36.
Make sure the camera is turned on and the batteries have
enough power.
Check the serial port settings on the Setup menu of your
EPSON Photo!2 software. You may need to change
the Port and Speed serial connection settings to Auto.
Avoid opening or working with applications unrelated
to the photo transfer process while the camera and
computer are communicating.
Note:
When the camera and computer are communicating, star
icons move across the camera's display panel.
Nothing appears on the TV monitor when the
camera is connected to your television.
Make sure the video cable is connected correctly, as
described on page 34.
Make sure the LCD monitor is switched to the Playback
mode.
Maintenance and Troubleshooting
Make sure the television is switched to the video mode.
Make sure the camera's batteries have enough power.
Your camera may not be compatible with local television
broadcasting standards. Cameras purchased in
countries using the NTSC standard can only be used
with NTSC televisions, and cameras purchased in
countries conforming to the PAL standard can only
be used with PAL televisions.
Note:
Also check your television user's manual for possible
solutions.
You cannot take a picture with the camera when an
optional CompactFlash Card is installed.
Check your camera's LCD monitor for messages. If you
get a message indicating that you need to format or
eject the card, follow the instructions.
Your card's memory may be full. Check the picture
counter on the display panel. If the card is full,
change to another card, erase some pictures using the
LCD monitor, or transfer the pictures to your
computer and then erase them.
7
89
Advertisement
Table of Contents
