Checking The Picture Counter - Epson PhotoPC 600 User Manual

Note:
You can switch freely between these settings and mix these
formats in the camera.
3. Once you have selected a photo format mode, press
the shutter button. In multi-frame mode, the LCD
screen goes black for a moment, then displays the
nine stop-action frames one by one. When all nine
frames appear, you have finished taking the
multi-frame picture.
Note:
If your camera is for use with PAL television broadcasting
standard, when you press and release the shutter button,
the LCD screen goes black and the status light flashes red.
When all nine frames are captured, the camera beeps. After
a few seconds, the multi-frame image appears on the LCD
screen. When the camera finishes processing the image, the
monitor returns to live preview and the status light turns
green. You can then take another photo.
To exit the photo format mode, simply press the photo
format button again.
Taking Pictures with PhotoPC 600

Checking the Picture Counter

The large number in the center of the camera's display
panel shows you how many pictures you can take.
number of pictures remaining
The number of pictures remaining depends on the image
quality setting you have chosen. If you change this
setting, the number of pictures remaining will change.
When the camera's memory is full, the number on the
display panel reads 0. The status light on the back of the
camera turns red, and you cannot press the shutter
button. You need to erase some or all of the images in
your camera before you can take any more pictures. See
page 63 for instructions on erasing photos using the LCD
monitor. If you want to save your photos before you
erase them, connect the camera to your computer and
transfer the photos as described in Chapter 4.
2
32