To Raise Outer Edge Of Extension; Aligning Table Extensions With Front Of Table; To Move Outer Edge Of Extensions; Back - Craftsman 113.221720 Owner's Manual

TO RAISE OUTER EDGE OF EXTENSION
1. Loosen screws C, D, and G on right extension.
2. Tighten screws B, E, and F until table extension is
level.
3. Snug down screws C, D, and G.
4. Repeat for left table extension.
, ,,, ,
L..._J ------
ALiGNiNG TABLE EXTENSIONS W_TH
FRONT OF TABLE
1. Place blade of combination square on front of table
and table extension.
2. Extension should line up with tabie.
WARNING: Front edges must line up to help
prevent workplece kickback when the fence is
mounted to the table extension.
t
EXTENSION
SHOULD BE
I NO GAP
TO MOVE OUTER EDGE OF
EXTENSION
BACK
1 Loosen screws C and F in right extension. See
illustration.
2. Tighten screws B and G until extension is lined up.
3. Snug down screws C and F.
4. Recheck level and flatness to table,
5, Check left extension.
6. Adjust left extension in same manner,
--q
J
\
\
\
/\
/ s
/
17