List Of Loose Parts - Craftsman 113.221720 Owner's Manual

Medium Screwdriver 7/16, 1/2,11/16 in.
#2 Phi ips Screwdriver
._ Long Nose P ers
"J' _ " " h P ers
Hex 'L ' wrenc
, 3/lf6, I/8, 5/32 in.
Combination Square
COMBINATION SQUARE MUST BE TRUE.
DRAW LIGHT LINE ON % BE PERFECTLY
BOARD ALONG THIS EDGE, ',, \ ,_ /
I x.,ll
11
SHOULD BE NO GAP OR OVERLAP
HERE WHEN SQUARE JS FLIPPED
OVER IN DOTTED POSITION,
STRAIGHT EDGE OF BOARD
3/4" THICK. THIS EDGE MUST
STRAIGHT,
Model 113.221720 Table Saw with extensions is shipped
complete inone carton.
Separate all parts from packing materials and check
each one with the illustration and the list of Loose Parts
to make certain all items are accounted for, before
discarding any packing material.
t WARNING: If any parts are missing, do not at-
I tempt to assemble the table saw, plug in the ]
power cord or turn the switch on until the missing I
parts are obtained and are installed correctly. I
LIST OF LOOSE PARTS
Item Part Name Qty.
A Miter Gauge Assembly .................................. 1
B Guard Assembly ............................................ 1
C Rip Fence Assembly ..................................... 1
D Extension, Table LH ..................................... 1
E Extension, Table R.H .................................... 1
F Handwheel .................................................... 2
G Owner's Manual ............................................ 1
Bag of Loose Parts ....................................... 1
Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean, dry cloth.
WARNING: For your own safety, never connect
plug to power source outlet until all assembly t
steps are complete, and you have read and under
stand the safety and operating instructions. I
Containing the following:
H Arbor Wrench ................... 1
J Shaft Wrench ................................................ 1
K Support, Spreader ......................................... 1
L Bracket, Spreader ......................................... 1
M Clamp, Spreader ........................................... 1
N Nut, Wing 1/4-20 ........................................... 2
O Tape, Fence Left ........................................... 1
P Tape, Fence Right ......................................... 1
A
N
o
P