Example Of Setting Instructions (Reference Example) - Epson S1D15722 Series Technical Manual

7. COMMAND

7.3 Example of Setting Instructions (Reference Example)

(1) Initial setting
Numbers in parentheses correspond to those in the item of command description.
46
V , V power supply ON in the state of
DD DD2
Stability of power supply *1
The state of reset cancelled.
Setting functions by command input (user-configuration) *3
(2) Display normal/inverted
(3) Full display lighting ON/OFF
(4) Select common output state
(5) Set display start line
(11) Direction of setting column address
(14) Set display mode
(17) Set number of display lines
(26) Select MLS drive
Setting functions by command input (user-configuration)
(12) Set n line inverted drive register
(13) n line inverted drive ON/FF
Setting functions by command input (user-configuration) *3
(21) Select clock frequency
(20) Built-in oscillation circuit ON/OFF
(25) Temperature seosor ON/OFF
(26) TEST1 set
<When external clock using,>
Input clock to CL pin
Supply LCD voltages externally *4
End of initial setting
EPSON
____
RES Pin =LOW
____
RES pin = HIGH *2
S1D15722D01B000 Technical Manual (Rev.1.1)