Format
#TIM
Function
When the GO command is entered, the execution time counter, execution time count mode
or step count mode is operative. The execution time count mode is the default at power on.
The setting is reversed at each command input.
Examples
#TIM
* STEP COUNT MODE
#TIM
* TIME COUNT MODE
#
Refer to Section 2.3.10, "Measurement during command execution", for more details on the
Note
time count and step count modes.
S1C62 FAMILY
DEVELOPMENT TOOL REFERENCE MANUAL
TIME OR STEP MODE SELECTION
...
...
EPSON
ICE CONTROL SOFTWARE ICS62XX
Since the mode after power supply is the time count mode,
entering a command toggles the setting to step mode
Setting is reversed with each command input
TIM
(Toggle)
VIII-81