Bd Set Break Data Condition - Epson S1C62 Family Reference Manual

SET/RESET BREAK DATA CONDITION
Format
#BD
#BDR
Function Break condition set for data RAM read/write area.
(1) BD:
(2) BDR: Cancels the condition set by BD command.
(3) A break condition set by the BD command is functional at one point only, but can be
mixed with BA and BR commands.
(4) A BD condition can be canceled by executing the BM command.
#BD
Examples
ADDR ---:074
DATA
R/W
In the above example, a break is set for when the number 5 is written to or read from the data RAM
address 074.
#BD
ADDR 074:
DATA
R/W
At the current settings, a break is generated when 1 is written to 2
#BDR
#BD
ADDR ---:
#
S1C62 FAMILY
DEVELOPMENT TOOL REFERENCE MANUAL
Break condition set for RAM data address, data, and R/W. Address can be set at
one point, data set from addresses 0 to F or masked, and the R/W area set to read,
write, or masked. A break is generated when the three conditions specified by
address, data, and R/W coincide.
...
-:5
-:*
...
5 :1*1*B ...
* :W ...
...
...
ICE CONTROL SOFTWARE ICS62XX
A hyphen (-) is displayed when the BD condition is absent
At address 74, the number 5 is entered as data and the R/W
is masked (*)
When no setting modification is made, hitting the
continues the operation to the next setting
Data is masked
Sets the R/W function to write
3
bit and 2
All BD conditions are cleared
Entering after canceling BD setting confirms cancellation
EPSON
BD, BDR
(With guidance)
key
1
bit at data RAM address 74.
VIII-53