S5U1C62000H Specifications; Features; Description; Software Configuration - Epson S1C62 Family Reference Manual

ICE CONTROL SOFTWARE ICS62XX

2 S5U1C62000H SPECIFICATIONS

2.1 Features

The ICE (S5U1C62000H) is a microcomputer
software development support tool that increases
the efficiency of software development for the
S1C62 Family of 4-bit single chip microcomput-
ers.
The ICE and the S1C62 Family evaluation board
(S5U1C62xxxE), when used in combination,
provide an exceptionally powerful hardware and
software development support environment.
The following flow chart shows the creation
sequence of the single chip microcomputer
system from development through mass produc-
tion.
Use of the ICE and evaluation board can greatly
shorten the development process time required
for debugging and system evaluation procedures.

Description

2.1.1
A description of the ICE follows.
(1) The ICE operates by connecting to a general purpose personal computer (IBM PC/XT, PC/AT). The
debugging environment is constructed by the user's personal computer acting as the host system.
(2) High-performance emulation commands are provided. A variety of commands are supplied, such as a
register value implemented break function, on-the-fly data display, history display, and other high-
level functions.
(3) The ICE is equipped with a special power supply. This power source supplies V
board, making additional power supply from the user side unnecessary.
(4) The ICE can also be used to analyze hardware. Hardware debugging is supported through the SYNC
and HALT terminals.

Software configuration

2.1.2
Fig. 2.1.2.1 Software configuration
VIII-2
Prototype operation
Operation of target
system connected to
an evaluation board
OS (Operating System)
PC-DOS
General ASM62XX
Purpose Cross
Editor Assembler
Cross Assembler
leased the S1C62XXX (FD)
EPSON
Determination of specifications
Hardware Software
Software
development
Debugging and
system evaluation
Sample order
Sample evaluation
Mass production order
Mass production
DD
ICS62XX ICE control software
ICE Control
runs on personal
Software computer (FD)
Control program
ICE
mounted on
Firmware
the ICE
Customer's application
Application
program mounted on
Program
the ICE (ROM)
DEVELOPMENT TOOL REFERENCE MANUAL
General purpose
personal computers,
cross assemblers, etc
Debug procedure with
ICE, evaluation board,
target and peripheral
devices connected
Fig. 2.1.1
Development flow
to the evaluation
S1C62 FAMILY