Table of Contents
Advertisement
If yourtractoris notequipped withrearreflectors,
assemble the tail reflectors tothe rearfender.
Placethereflectorsascloseto the bottomofthe
fenderandasfar apartas the shapeof thefender
will allow.Seefigure28.
\
TAIL REFLECTORS
FIGURE
28
CHECKLIST
Before you operate your snow thrower,
please
review the following
checklist
to help ensure that
you will obtain the best performance
from your
snow thrower.
•
All assembly
instructions
have been completed
with
all bolts and nuts properly tightened.
•
Check the engine belt and the auger belt. Make
sure they are routed properly around pulleys and
inside all belt keepers.
•
Check discharge chute for proper rotation.
•
Check operation
of tilt control for upper chute.
•
Verify that the lift handle will lock into and release
from the raised transport
position.
(Refer to the
Service and Adjustments
section.)
•
Check skid shoe adjustment.
(Refer to the Service
and Adjustments
section.)
The following
additional
items are available from
Sears to help enhance the performance
of your
snow thrower.
See page 2.
•
Tire chains which can be installed to improve
traction.
•
Rear wheel weights which can be installed in
addition to the rear weight tray to improve traction.
•
Drift cutter bars which can be installed to help slice
off the edges of tall drifts.
14
Advertisement
Table of Contents
