Hot Replacement; Cold Replacement - Fujitsu SPARC Enterprise M3000 Service Manual

Note – In a nonmirrored configuration, if you have a backup copy of data which is
made in advance, restore it as required.
9.4.2

Hot Replacement

1. Start the domain.
See
cords to power outlets and perform the subsequent steps.
2. Verify the state of the LED indicator of the hard disk drive.
For information on the LED status, see
9.4.3

Cold Replacement

1. Power on the Server.
See
2. Check the hardware.
This procedure includes the steps of running a program to verify that all the
components have been remounted and to start the Oracle Solaris OS.
For details, see
Section 4.5.3, "Powering on the Server" on page
Section 4.5.3, "Powering on the Server" on page
Section 4.5.4, "Verifying the Hardware Operation" on page
Chapter 9
TABLE 2-3
Replacement and Installation of a Hard Disk Drive (HDD)
4-13. Connect the power
to .
TABLE 2-5
4-13.
4-15.
9-7