Cold Replacement; Removing A Hard Disk Drive - Fujitsu SPARC Enterprise M3000 Service Manual

9.1.3

Cold Replacement

For cold replacement, stop the domain and then power off the server. See Section
Section 4.5.1, "Powering off the Server" on page
9.2

Removing a Hard Disk Drive

Note – If a new hard disk drive is to be installed in an empty disk slot, remove the
HDD filler panel first.
1. Push the square button on the front of the hard disk drive (1 in
release the eject/lock lever (2 in
2. Pull the eject/lock lever (3 in
straight out from the unit (4 in
9-4 SPARC Enterprise M3000 Server Service Manual • March 2012
4-12.
).
FIGURE 9-2
) so that the hard disk drive is pulled
FIGURE 9-2
).
FIGURE 9-2
) to
FIGURE 9-2