Dc Power Supply Model - Fujitsu SPARC Enterprise M3000 Service Manual

E
A P P E N D I X

DC Power Supply Model

This appendix describes the requirements specific to the DC power supply model.
Contact your sales representative for the DC power supply model.
To use the DC power supply model, make sure to read this information.
Section E.1, "The Server Views" on page E-2
■
This is equivalent to
the DC power supply model, refer to the content described in this appendix.
Section E.2, "LED Functions of Power Supply Unit" on page E-4
■
This is equivalent to
the content described in this appendix.
Section E.3, "Electrical Specifications" on page E-5
■
This is equivalent to
the content described in this appendix.
Section E.4, "Using the showhardconf Command" on page E-6
■
This is equivalent to
page
unit/Fan unit)" on page 4-10
Operation" on page
content described in this appendix.
Note – The content not mentioned in this appendix is common to the AC power
supply model and the DC power supply model. Refer to the description in each
chapter.
Section 2.1, "Name of Each Part" on page
TABLE 2-5
TABLE B-7
Section 3.5.1, "Using the showhardconf Command" on
3-11, Section 4.4.2, "Verifying the Hardware Operation (Power supply
4-15. When using the DC power supply model, refer to the
. When using the DC power supply model, refer to
. When using the DC power supply model, refer to
and Section 4.5.4, "Verifying the Hardware
2-1. When using
E-1