Memory Mounting Rules - Fujitsu SPARC Enterprise M3000 Service Manual

7
C H A P T E R
Replacement and Installation of
Memory
This chapter explains how to replace and install memory (DIMMs).
Section 7.1, "Memory Mounting Rules" on page 7-3
■
Section 7.2, "Accessing the DIMMs" on page 7-7
■
Section 7.3, "Removing the DIMMs" on page 7-8
■
Section 7.4, "Installing the DIMMs" on page 7-9
■
Section 7.5, "Reassembling the Server" on page 7-9
■
DIMMs are cold replacement components. This means that the entire server must be
powered off and the power cords must be disconnected to replace the DIMMs.
The same methods as those for replacement are used for installation of DIMMs.
7-1