Bypassing Minor Faults; Automatic System Recovery; Enable Automatic System Recovery - Fujitsu SPARC Enterprise T5440 Server Administration Manual

Bypassing Minor Faults

This section contains:
"Automatic System Recovery" on page 31
■
"Enable Automatic System Recovery" on page 31
■
"Disable Automatic System Recovery" on page 32
■
"View Components Affected by ASR" on page 33
■

Automatic System Recovery

Automatic system recovery (ASR) functionality enables the system to resume
operation after experiencing certain non-fatal hardware faults or failures. Once you
enable ASR, the system's diagnostic firmware automatically detects failed hardware
components. The autoconfiguring capability designed into the system firmware
enables the system to unconfigure failed components and restore system operation.
As long as the system is capable of operating without the failed component, the ASR
features enable the system to reboot automatically, without operator intervention.
The system provides ASR for failures in CPU cores or threads, memory modules, and
PCIE slots.
Related Information
"Enable Automatic System Recovery" on page 31
■
"Disable Automatic System Recovery" on page 32
■

▼ Enable Automatic System Recovery

To enable Automatic System Recovery, you must change system parameters in two
places: at the ILOM -> prompt, and at the ok prompt.
1. Log in to ILOM.
See "Log In to ILOM" on page 28.
Manage the System 31