Hot-Plug A Nonmirrored Disk - Fujitsu SPARC Enterprise T5440 Server Administration Manual

5. To check the status of the RAID rebuild, type:
# raidctl
For example:
# raidctl
RAID
Volume
-----------------------------------------------------------------
c0t1d0
This example indicated that RAID volume c0t1d0 is resynchronizing. If you issue
the command again once synchronization is complete and the disk is back online,
the RAID status changes from RESYNCING to OK.
Related Information
"Hot-Plug a Nonmirrored Disk" on page 24
■
"Delete a Hardware RAID Volume" on page 21
■

▼ Hot-Plug a Nonmirrored Disk

1. Verify which hard drive corresponds with which logical device name and
physical device name.
See
Caution – To avoid data corruption or loss, ensure that no applications or processes
are accessing the hard drive.
24 SPARC Enterprise T5440 Server Administration Guide • July 2009
Volume
Type
IM
"Disk Slot Numbers" on page
RAID RAID
Status Disk
RESYNCING c0t1d0
c0t2d0
20.
RAID
Status
OK
OK