Manage The System; Searching For Faults - Fujitsu SPARC Enterprise T5440 Server Administration Manual

Manage the System

This section contains information about basic fault management and managing
devices.
Description
Use ILOM to view system faults
and set diagnostic levels.
Configure your system to resume
operation when encountering
nonfatal faults.
Clear component fault messages
manually.
Manage devices manually.

Searching for Faults

This section contains:
"Log In to ILOM" on page 3
■
"Display System Faults" on page 28
■
"Run Full POST Diagnostics on Reset" on page 29
■
"Locate the System" on page 30
■
Lilnks
"Log In to ILOM" on page 3
"Display System Faults" on page 28
"Run Full POST Diagnostics on Reset" on page 29
"Locate the System" on page 30
"Automatic System Recovery" on page 31
"Enable Automatic System Recovery" on page 31
"Disable Automatic System Recovery" on page 32
"View Components Affected by ASR" on page 33
"Clear Component Fault Messages" on page 34
"Unconfigure a Device Manually" on page 34
"Configure a Device Manually" on page 35
"Devices and Device Identifiers" on page 35
27