Basic Administrative Tasks; Initial System Setup - Fujitsu SPARC Enterprise T5440 Server Administration Manual

Basic Administrative Tasks

This section contains information about common tasks used to manage your system
after initial setup.
Description
Refer to your systems' installation and
setup guide for initial setup
instructions.
Access the system using ILOM, or
configure alternate ways to
communicate with the system.
Perform common tasks.

Initial System Setup

For directions on initial system setup, see the installation guide for your server. That
book contains the following information:
Installing the Server Hardware
■
Configuring the Service Processor
■
Setting Up the Operating System Software
■
Links
"Initial System Setup" on page 1
"ILOM Overview" on page 2
"Log In to ILOM" on page 3
"Log In to the System Console" on page 4
"Display the ok Prompt" on page 4
"System Console Output Options" on page 5
"Access the System Console Through a Local
Graphics Monitor" on page 6
"Power On the System" on page 7
"Power Off the System" on page 7
"Reset the System" on page 8
"Update the Firmware" on page 9
1