Hard Disks; Installing A Second Non-Hot-Plug Hard Disk - Fujitsu Primergy RX100 S3 Options Manual

7

Hard disks

V
CAUTION!
Observe the safety instructions in the
et seqq. .
7.1

Installing a second non-hot-plug hard disk

Ê Open the server as described in the
seqq. .
Figure 10: Removing the dummy cover
Ê Remove the dummy cover from the bay.
V
CAUTION!
Keep the dummy cover for future use. If you remove the accessible drive
again and do not replace it with a new one, the dummy cover must be
reinstalled to comply with EMC regulations and to satisfy cooling require-
ments and fire protection measures.
U41617-J-Z156-1-76
chapter "Safety notes" on page 11
chapter "Preparation" on page 17
Options Guide
et
27