Help Mode; F3- Display Information; Figure 14- Information Provided By The F3 Command - Network Technologies NTI UNIMUX UNIMUX-USBV-4 Installation And User Manual

Help Mode

To enter Help Mode press the <F1> key from the Command Mode menu (see page 13).
Help Mode displays a list of commands with a short explanation of their function. The following options allow the user to quickly
obtain information on any command
Function:
View the previous page of help
if available
View the next page of help
if available
Exit HELP and return to previous
mode

F3- Display Information

To display information about a selected port, pressing the <F3> key from within the Command Mode main menu will cause a
window to open. The window will show the name of the port and its position in the system structure, level by level. This is most
useful when cascading switches (for Cascading see page 22).
This means that the CPU connected through this port is actually connect through Port 5 of the master switch (Level 1), and
through port 3 of the slave connected to port 4 (Level 2).
.
Keystroke:
Page
Up
Page
Down
Esc
LEVEL 1 : PORT 5
LEVEL 2 : PORT 3
See Fig. 14 below.

Figure 14- Information provided by the F3 command

19
An example of this structure might be