Fujitsu PRIMERGY BX600 User Interface Description page 196
Blade server systems intelligent blade panel module 30/12
Hide thumbs
Also See for PRIMERGY BX600:
- User manual (229 pages) ,
- Reference manual (161 pages) ,
- Start manual (13 pages)
Table of Contents
Advertisement
Management Commands
7.5.5.2 snmp trap link-status
This command enables link status traps by interface.
Note: This command is valid only when the Link Up/Down Flag is enabled. See 'snmpserver
enable traps linkmode' command.
Syntax
snmp trap link-status
no snmp trap link-status
no - This command disables link status traps by interface.
Note: This command is valid only when the Link Up/Down Flag is enabled. (See
'snmpserver enable traps linkmode' command.)
Default Setting
Disabled
Command Mode
Interface Config
This command enables link status traps for all interfaces.
Note: This command is valid only when the Link Up/Down Flag is enabled (See 'snmpserver
enable traps linkmode' command.)
Syntax
snmp trap link-status all
no snmp trap link-status all
all - All interfaces.
no - This command disables link status traps for all interfaces.
Note: This command is valid only when the Link Up/Down Flag is enabled (see
"snmpserver enable traps linkmode").
195
Command Reference
Intelligent Blade Panel Module
Advertisement
Table of Contents
