Show Loginsession - Fujitsu PRIMERGY BX600 User Interface Description

System Information and Statistics commands
running on the IBP. For example, if the major version was 2 and the minor version was 4, the
format would be '2.4'.
Operating Code Version: The release version maintenance number of the code currently
running on the IBP. For example, if the major version was 2 and the minor version was 4, the
format would be '2.4'.
Boot Rom Version: The release version maintenance number of the boot rom code
currently running on the IBP. For example, if the major version was 2 and the minor version
was 4, the format would be '2.4'.

7.3.9 show loginsession

This command displays current telnet and serial port connections to the IBP.
Syntax
show loginsession
Default Setting
None
Command Mode
Privileged Exec
Display Message
ID: Login Session ID
User Name: The name the user will use to login using the serial port or Telnet. A new user
may be added to the IBP by entering a name in a blank entry. The user name may be up to 8
characters, and is not case sensitive. Two users are included as the factory default, admin,
and guest.
Connection From: IP address of the telnet client machine or EIA-232 for the serial port
connection.
Idle Time: Time this session has been idle.
Session Time: Total time this session has been connected.
Session Type: Shows the type of session: telnet, serial or SSH.
139
Command Reference
Intelligent Blade Panel Module