Configuration Commands - Fujitsu PRIMERGY BX600 User Interface Description

SNTP Commands
Display Message
Client Supported Modes Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports.
Port SNTP Client Port
Client Mode: Configured SNTP Client Mode.
Unicast Poll Interval Poll interval value for SNTP clients in seconds as a power of two.
Poll Timeout (Seconds) Poll timeout value in seconds for SNTP clients.
Poll Retry Poll retry value for SNTP clients.
This command displays configured SNTP servers and SNTP server settings.
Syntax
show sntp server
Default Setting
None
Command Mode
Privileged Exec
Display Message
Server IP Address IP Address of configured SNTP Server
Server Type Address Type of Server.
Server Stratum Claimed stratum of the server for the last received valid packet.
Server Reference ID Reference clock identifier of the server for the last received valid
packet.
Server Mode SNTP Server mode.
Server Max Entries Total number of SNTP Servers allowed.
Server Current Entries Total number of SNTP configured.
For each configured server:
IP Address IP Address of configured SNTP Server.
Address Type Address Type of configured SNTP server.
Priority IP priority type of the configured server.
Version SNTP Version number of the server. The protocol version used to query the server
in unicast mode.
Port Server Port Number
Last Attempt Time Last server attempt time for the specified server.
Last Update Status Last server attempt status for the server.
Total Unicast Requests Number of requests to the server.
Failed Unicast Requests Number of failed requests from server.

7.10.2 Configuration Commands

252
Command Reference
Intelligent Blade Panel Module