Fujitsu PRIMERGY BX600 User Interface Description page 149

Device Configuration Commands
7.4.1.5 interface
This command is used to enter Interface configuration mode.
Syntax
interface <slot/port>
<slot/port> - is the desired interface number.
Default Setting
None
Command Mode
Global Config
7.4.1.6 interface range
This command is used to enter Interface range configuration mode.
Syntax
interface range {<slot/port> [ - <slot/port>]} [, {<slot/port> [ - <slot/port>]} [,
.
{<slot/port> [ - <slot/port>]}
<slot/port>]}]]]]
<slot/port> - is the desired interface number.
Default Setting
None
Command Mode
Global Config
148
[, {<slot/port> [ - <slot/port>]} [, {<slot/port> [ -
Command Reference
Intelligent Blade Panel Module