Fujitsu PRIMERGY BX600 User Interface Description page 204

Management Commands
Default Setting
SSH1 and SSH2
Command Mode
Global Config
7.5.7.4 ip ssh maxsessions
This command specifies the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is 0 to
5.
Syntax
ip ssh maxsessions <0-5>
no ip ssh maxsessions
<0-5> - maximum number of sessions.
no - This command sets the maximum number of SSH connection sessions that can be
established to the default value.
Default Setting
SSH1 and SSH2
Command Mode
Global Config
7.5.7.5 ip ssh timeout
This command sets the SSH connection session timeout value, in minutes. A session is active
as long as the session has been idle for the value set. A value of 0 indicates that a session
remains active indefinitely. The time is a decimal value from 0 to 160. Changing the timeout
value for active sessions does not become effective until the session is reaccessed. Any
keystroke will also activate the new timeout duration.
203
Command Reference
Intelligent Blade Panel Module