Features of the IBP Module
2.2.2 Status of LEDs
The front panel contains light emitting diodes (LED) that indicate the status of links, and IBP
Each of uplink port has two LED indicators.
One Gbe Port LED definition:
Power, Manage of LED indicator:
There is one IBP Module system LED with dual functions, controlled by MMB for error status
reporting and blade identification. Different flashing frequencies are used to indicate the
different functions. There are two functions, identification and error reporting, with identification
having a higher priority than error reporting.
NOTE: If there is an error and the identification function is activated, the LED still functions as
an identification LED. The LED can only be disabled by the MMB with a 255 seconds timeout. If
an error is happening, the LED for error reporting will always be flashing and cannot be turn off.
The following table describes the system LED indications.
2.3 Features and Benefits
30 internal Gigabit ports for easy network integration of your server cards
12 external 1000BASE-T Gigabit ports for uplinking to the corporate network
Support for auto MDI/MDI-X on external ports allows any connections to be made with
Port Link at 1000 Mbps
Port Link at 100 Mbps
Port Link at 10 Mbps
No Network Link or port disable
Intelligent Blade Panel Module