Completing The Installation - Hayes PCI Modem User Manual

screw the bracket into the computer using the screw you
removed earlier.
6
Replace the computer cover.
7
Connect the telephone cord: Plug one
end of the phone cord into the jack
marked LINE. Plug the other end into a
phone jack (typically the wall jack where
you would normally connect a phone).
Plug your phone into the PHONE jack if
you want to use a phone on the same
line.
8
Plug in your computer and turn it on.
9
Windows 95/98/Me/2000 Users: As the Windows oper-
ating system starts up, it will detect your new faxmodem.
Because the installation program has already provided
your computer with the required files, you will see Win-
dows report on its progress, but it will not require any ac-
tion on your part. You may see a dialog box that says
Digital Signature Not Found. You can safely ignore this
message and click Yes. Continue below with Completing
the Installation.
Windows NT 4.0 Users: Please go to Installing the
Drivers on page 5.

Completing the Installation

Turn your computer back on and perform the following steps:
1
Open Control Panel and double-click the Modems or
Phone and Modems icon. Click the entry for your new
modem and then click the Properties button.
Set the Maximum speed to the highest speed available
(probably 115,200). This sets the speed at which the
Installing your PCI Faxmodem
LINE
LINE
PHONE (optional)
PHONE
9