Restarting Or Shutting Down The Dvr; Configuring System Warnings - Lorex Vantage LH010 ECO BLACKBOX SERIES Instruction Manual

Using the Main Menu
7 Right-click until you have exited all menus.
The DVR prompts you to restart.
Restarting or Shutting Down the
DVR
To restart or shut down the DVR:
1 Right-click to open the Menu Bar and click
the Main Menu button (
2 Click Advanced.
3 Click Reboot or Shut Down.
4 Follow the on-screen instructions to
restart or shut down your system.

Configuring System Warnings

The system can send out email
notifications if it detects system
abnormalities. For example, the system
can send out a warning if the hard drive
is low on storage.
46
).
Reboot / Shut Down
To configure system warnings:
1 Click the Events tab.
2 Configure the following:
• Event Type: Select the event that triggers
the system to send out a notification.
Choose from Disk No Space (low hard
drive space), Disk Error (hard drive error),
or Video Loss.
• Enable: Select Enable or Disable to
activate or deactivate the system from
sending out notifications.
• Show Message: Select the checkbox for
the system to display an error message
when an event occurs.
• Send Email: Select the checkbox for the
system to send out email notifications
when a system error occurs. Please note
that email notifications must be
configured.
• Buzzer: Select the buzzer (system beep)
duration when the system detects a
system error.
3 Click Apply to save your settings.