Troubleshooting Remote Connections - Lorex Vantage LH010 ECO BLACKBOX SERIES Instruction Manual

Digital video surveillance recorder
Hide thumbs Also See for Vantage LH010 ECO BLACKBOX SERIES:
Table of Contents

Advertisement

Troubleshooting

Troubleshooting Remote Connections

Error
• Cannot connect to the
DVR on a local network
• Cannot connect to the
DVR over the Internet
• Cannot connect to the
DVR using a mobile device
110
Possible Causes
• DVR not connected to router
• DVR and computer not on same
network
• Ports not forwarded
• DDNS account not created
• DDNS not enabled on DVR
• DDNS address not entered
correctly
• DVR has not been configured
for Internet connection
• Mobile Port has not been
forwarded
• IP address used from outside
internal network
• Router is blocking DDNS
connection from internal network
Solutions
• Connect an Ethernet cable from the DVR LAN port
to your router, and then restart the DVR by
disconnecting and reconnecting the power adapter
• Ensure your DVR and computer are connected to
the same router
• If your computer is using a WiFi network, try
connecting it to the router using an Ethernet cable
• Port Forward the HTTP port (default: 80), Client
Port (default: 9000), and Mobile Port (default: 1025)
on your router. For details on port forwarding, see
the Easy Connect manual on the CD or the
reference guides on
www.lorextechnology.com
• Follow the instructions under "Step 2 of 4: Create
a DDNS Account" on page 52
• Follow the instructions under "Step 3 of 4: Enable
DDNS on the DVR" on page 56
• If connecting through client software, enter the
URL request from the confirmation email and then
.lorexddns.net. (For example,
tomsmith.lorexddns.net
)
• In Internet Explorer or Safari, enter http://, the
URL request from the confirmation email, and then
.lorexddns.net, colon, and HTTP port (for example, 
http://tomsmith.lorexddns.net:80
• Ensure you have followed all the steps in "Setting
up your DVR for Remote Connectivity" on page 47.
See above to troubleshoot remote connections
• Forward the Mobile Port (default: 1025) on your
router. For details, For details on port forwarding,
see the Easy Connect manual on the CD or the
reference guides on
www.lorextechnology.com
• Use the DDNS address to connect to the DVR
using a mobile application
• Turn off WiFi connection and attempt to connect
using 3G or mobile network
)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents