Enabling Auto Port Forwarding; Changing The Dvr's Client And Http Port; Adjusting Remote Connectivity Streaming Rates - Lorex Vantage LH010 ECO BLACKBOX SERIES Instruction Manual

Using the Main Menu
4 Right-click until you exit all menus. You
will be prompted to restart.

Enabling Auto Port Forwarding

Auto Port Forwarding allows the DVR to
open required ports on your router. This
feature only works on certain router
models. If the Auto Port Forwarding
feature does not work on your router, it
is recommended to use the Auto Port
Forwarding Wizard (PC only), located on
the software CD. You may have to
manually open the port on your router.
To Enable Auto Port Forwarding:
1 Select the Network tab.
2 In the Auto Port Forwarding drop-down
menu, select Enable or Disable.
3 Click Apply to save your settings.
Changing the DVR's Client and
HTTP Port
The DVR's Default Client port is 9000.
The default HTTP port is 80. You must
port forward the Client Port and HTTP
port to your router for remote access.
To change the default Client port and
HTTP port:
1 Select the Network tab.
2 In Client Port, enter the desired Client
Port (default: 9000).
Client Port & HTTP Port fields
NOTE: 9000 is represented as "09000."
38
3 In HTTP Port, enter the desired HTTP Port
(default: 80).
4 Click Apply to save your settings.
5 Right-click to exit all menus. You will be
prompted to restart.
Adjusting Remote Connectivity
Streaming Rates
You can adjust the data streaming rate
(also called the SubStream) when you
connect to the system remotely. If you
want to conserve bandwidth, select a
lower frame rate and bitrate.
NOTE: Setting your system to stream with a
lower frame and bitrate may cause
the video to appear choppy or slow.
To adjust the SubStream settings:
1 Click the SubStream tab.
2 Configure the following beside the desired
channel:
• Video: Select Enabled or Disabled. If you
select Disabled, you will not be able to view
the channel when connecting remotely to
the system.
• FPS: Select the desired frames per
second.
• Bitrate: Select the desired video bitrate.
• Audio: Select or deselect the checkbox to
enable or disable the system from
streaming audio when viewing the system
remotely.
3 Click Apply to save your settings.