Configuring Recording Parameters; Configuring The Recording Schedule - Lorex Vantage LH010 ECO BLACKBOX SERIES Instruction Manual

Remote Viewing Interface

Configuring Recording Parameters

To configure system recording parameters:
1 Click the Remote Setting tab, and then click Record>Rec Parameters.
2 Configure the following:
• Channel: Select the channel you wish to configure.
• Record: Select Enable or Disable to start or stop system recording.
• Pack Duration: Select the duration of each saved file on the system. For example, if you select
15 minutes, then every file will contain 15 minutes of footage.
• Pre-record: Select whether to enable or disable pre-recording.
3 Click Save to apply your settings.

Configuring the Recording Schedule

To configure the recording schedule:
1 Click the Remote Setting tab, and then click Record>Schedule.
2 Configure the following:
• Channel drop-down menu: Select the channel you wish to configure.
• Week: Select the day of the week you would like to apply the settings to.
68
The recording schedule is
arranged as a grid. Each
row represents a
recording type
(Continuous and Motion),
and each box represents
an hour.