Replacing The Hard Drive - Lorex Vantage LH010 ECO BLACKBOX SERIES Instruction Manual

Appendix E: Replacing the Hard Drive
5 Carefully flip the DVR back over. Slide the hard drive to the left (if looking at the DVR from the
front) and then lift the hard drive out of the DVR.
Slide the hard drive to the left and
then lift it out of the DVR

Replacing the Hard Drive

To replace the hard drive:
1 Insert 4 hard drive screws into bottom the hard drive and tighten them 1/2 of the way.
Insert the hard drive screws (4x) into the
hard drive and tighten them 1/2 way
2 Place the hard drive with the power and data connectors facing left (if looking at the DVR from
the front) and then slide the hard drive to the right.
Place the hard drive in the DVR with
power and data connectors facing
left and slide to the right
3 Reconnect the power and data cables. Each cable can only be connected one way.
106
Hard drive power and data
connectors