Loading System Defaults; Restarting Or Shutting Down The System; Configuring System Warnings - Lorex LH120 Series Instruction Manual
Digital video surveillance recorder
Hide thumbs
Also See for LH120 Series:
- Brochure & specs (5 pages) ,
- Quick setup manual (2 pages) ,
- Upgrade instructions (2 pages)
Table of Contents
Advertisement
Using the Main Menu
Loading System Defaults
Loading the system defaults restores
the system's configuration to the
factory settings.
To load system defaults:
1
From the main menu, click
Advance>Load Default.
2
Select the menus that you wish to restore
to default settings.
3
Click Apply.
4
When the warning window appears, click
OK to restore your settings.
5
Click OK to return to the menu.
6
The system prompts you to restart.
48
Restarting or shutting down the
system
To restart or shut down the system:
1
From the main menu, click Advance.
2
Click Reboot or Shut Down.
3
Follow the on-screen instructions to
restart or shut down your system.
Configuring system warnings
The system can send out e-mail
notifications, or trigger a connected
alarm device if it detects system
abnormalities. For example, the system
can send out a warning if the hard drive
is low on storage.
To configure system warnings:
1
From the main menu, click
Advanced>Events.
Reboot / Shut Down
Advertisement
Table of Contents
