Show all configuration parameters related to SNMP manager
Command Name
Description
Syntax
Parameters
Example
Notes
System Restart
Command Name
Description
Syntax
Parameters
Example
Notes
(Revised 2011-07-20)
system show snmpinfo
To show all the configuration parameters related to snmp manager
system show snmpinfo
None
N-TRON/Admin#[33]system/show> snmpinfo
System SNMP Configuration :
IP Address - Trap Station#1
IP Address - Trap Station#2
IP Address - Trap Station#3
IP Address - Trap Station#4
IP Address - Trap Station#5
SNMP Get Community Name
SNMP Set Community Name
SNMP Trap Community Name
system restart
To restart (reboot) the device
system restart
None
N-TRON/Admin#[1]> system restart
Do you Want to Restart the System Now:
Do you Want to Save the Configuration:
................
................
: 192.168.1.2
: Value Not Configured
: Value Not Configured
: Value Not Configured
: Value Not Configured
: public
: private
: public
[y/n]y
[y/n]y
page 102 of 145