Table of Contents
Advertisement
Mirroring related commands
Set Mirror config
Command Name
Description
Syntax
Parameters
Examples
NOTES
Enable or Disable Port Mirroring
Command Name
Description
Syntax
Parameters
Examples
NOTES
Show Mirror config
Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-07-20)
mirror set config
To the mirroring feature of the switch, for specified ports.
mirror set config <dest-port> <src-ports>
dest-port
Destination port is the snooper port onto which the selected
source ports traffic is to be mirrored.
The gigabit ports cannot be destination ports.
src-ports
List of ports to be monitored.
N-TRON/Admin#[1]> mirror set config 1 2-5
A mirroring port is a dedicated port that is configured to receive the copies
of Ethernet frames that are being transmitted out and also being received in
from any other port that is being monitored.
mirror set <enable | disable>
Enables or disables network monitoring or port mirroring. It treats source
port as the Ethernet port and the destination port as a monitoring port.
mirror set enable
None
N-TRON/Admin#[1]> mirror set enable
mirror enabled
N-TRON/Admin#[1]> mirror set disable
mirror disabled
mirror show
To show all the mirror information.
mirror show
None
N-TRON/Admin#[1]> mirror show
-------------------------------------------
| DEST PORT | SOURCE PORTS | MIRROR STATE |
-------------------------------------------
| 5
|
-------------------------------------------
2-4 |
ENABLED |
page 117 of 145
Advertisement
Table of Contents
