Enabling And Disabling Protocols - Ricoh Aficio MP C5502 User Manual

5. Enhanced Network Security

Enabling and Disabling Protocols

Specify whether to enable or disable the function for each protocol. By making this setting, you can
specify which protocols are available and so prevent unauthorized access over the network. Network
settings can be specified on the control panel, or using Web Image Monitor, telnet,
SmartDeviceMonitor for Admin or Remote Communication Gate S. If you use SmartDeviceMonitor for
Admin, start Web Image Monitor from SmartDeviceMonitor for Admin and configure the settings from
there.
Protocol
IPv4
IPv6
IPsec
118
Port
-
-
-
Setting method
• Control panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Remote
Communication Gate S
• Control panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
• Remote
Communication Gate S
• Control panel
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
When disabled
All applications that
operate over IPv4
cannot be used.
IPv4 cannot be
disabled from Web
Image Monitor when
using IPv4 transmission.
All applications that
operate over IPv6
cannot be used.
Encrypted transmission
using IPsec is disabled.