Ricoh Aficio MP C5502 User Manual page 243

10. Troubleshooting
Problem
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently
when printing on sheets
loaded in internal tray 2.
172
Causes
The tray's side or end fences
may not be set properly.
Paper of undetectable size
has been loaded.
There is a foreign object on
the finisher tray.
Paper misfeeds can occur if
the output tray is set to
internal tray 2 and multiple
A3 or 11 17 sheets begin
to curl as they are output.
Solutions
• Remove misfed paper. For details
about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting .
• Check that the side or end fences
are set properly. Also, check that
the side fences are locked. For
details about setting the side and
end fences, see "Changing the
Paper Size", Paper Specifications
and Adding Paper
• Remove misfed paper. For details
about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting .
• If you load a paper size that is not
selected automatically, you need
to specify the paper size with the
control panel. For details about
specifying paper size with the
control panel, see "Changing to a
Size That Is Not Automatically
Detected", Paper Specifications
and Adding Paper
• Remove misfed paper. For details
about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting .
• Do not place anything on the
finisher tray.
Raise the guide on internal tray 2, and
then try printing the job again.
For details about raising the guide, see
"When Printouts on the Internal Tray 2
Are Curled", Getting Started
.
.
.