1. Getting Started
6.
Press [Change] for the administrator you wish to reset.
7.
Press [Change] for "Login Password".
8.
Enter the login password, and then press [OK].
9.
If a password reentry screen appears, enter the login password, and then press [OK].
10.
Press [OK] twice.
You will be automatically logged out.
• Log in as the supervisor only to change an administrator's password. Administrator's login names
cannot be changed.
Changing the Supervisor
This section describes how to change the supervisor's login name and password.
To do this, you must enable the user administrator's privileges through the settings under "Administrator
Authentication Management". For details, see p.16 "Specifying Administrator Privileges".
1.
The supervisor logs in from the control panel.
For details on how to log in, see p.22 "Administrator Login Method".
2.
Press [System Settings].
26