Enterasys C1H124-24 Installation Manual page 54

Using LANVIEW
NOTE: The terms flashing, blinking, and solid used in
following:
Flashing: LED is flashing randomly.
Blinking: LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid: LED is on steady and not pulsing.
Table 4-1 LANVIEW LEDs
LED Color
CPU Red
Amber
Green
Amber
4-2 Troubleshooting
State
Solid. System is not fully
functional, or the system
is experiencing a fatal
error.
Solid. Power-up testing
in progress.
Solid. System is fully
functional.
Blinking. System is
booting up.
Blinking. Image is being
loaded into Flash
memory.
Table 4-1
Recommended Action
If the LED remains red for several minutes,
the system may have a fatal error. Contact
Enterasys Networks for technical support.
If the LED remains amber for more than
several minutes, contact Enterasys Networks
for technical support.
None.
None.
None.
indicate the