Document Size
To specify the default document size:
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the
(Copy) button.
3 Press the
button until Document Size is highlighted, and then press the
4 Press the
button to select the desired settings, and then press the
NOTE:
Values marked by an asterisk (
*1
A4 (210 x 297 mm)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
*1
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x 10.5")
*1
The default for
Document Size varies
depending on country specific
factory default.
5 Press the
(Start) button to begin copying.
Original Type
To select the copy image quality.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the
(Copy) button.
3 Press the
button until Original Type is highlighted, and then press the
4 Press the
button to select the desired settings, and then press the
NOTE:
Values marked by an asterisk (
Text
Text & Photo*
Photo
5 Press the
(Start) button to begin copying.
238
Copying
*
) are the factory default menu settings.
*
) are the factory default menu settings.
Suitable for documents with text.
Used for documents with both text and photos.
Suitable for documents with photos.
(Set) button.
(Set) button.
(Set) button.
(Set) button.