Dell C1765nf Color Laser User Manual page 195

Adjust Transfer Roller
Purpose:
To specify the optimum voltage settings for printing for the transfer roller. To decrease the voltage, set negative
values. To increase the voltage, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
NOTE:
The print quality changes depending on the values you select for this item.
Values:
Plain 0*
Available Range: -3 – +3
Plain Thick 0*
Available Range: -3 – +3
Covers 0*
Available Range: -3 – +3
Coated 0*
Available Range: -3 – +3
Label 0*
Available Range: -3 – +3
Recycled 0*
Available Range: -3 – +3
Envelope 0*
Available Range: -3 – +3
Adjust Fusing Unit
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To decrease the temperature, set
negative values. To increase the temperature, set positive values.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to
decrease the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE:
The print quality changes depending on the values you select for this item.
Values:
Plain 0*
Available Range: -3 – +3
Plain Thick 0*
Available Range: -3 – +3
Covers 0*
Available Range: -3 – +3
Coated 0*
Available Range: -3 – +3
Understanding the Printer Menus
193