Fax Defaults - Dell C1765nf Color Laser User Manual

Fax Defaults

Use the Fax Defaults menus to configure a variety of fax features.
NOTE:
The FAX service cannot be used unless you set up a country code under
message
Set The Country Code
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Resolution
Purpose:
To specify the resolution level to be used for fax transmission.
Values:
Standard* Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or documents printed using a dot-matrix
printer.
Super Fine
Suitable for documents containing extremely fine detail. The
remote machine also supports the super fine resolution. See the notes below.
Ultra Fine
Suitable for documents containing photographic images.
NOTE:
Faxes scanned in the
Original Type
Purpose:
To select the default document type.
Values:
Text* Suitable for documents with text.
Photo Suitable for documents with photos.
Lighter/Darker
Purpose:
To set the default copy density level.
Values:
Lighter2 Makes the fax lighter than the original. Works well with dark print.
Lighter1
Normal* Works well with standard typed or printed documents.
Darker1 Makes the fax darker than the original. Works well with light print or faint pencil markings.
Darker2
172
Understanding the Printer Menus
appears on the display.
mode transmit at the highest resolution supported by the receiving device.
Super Fine
. If is not set up, a
Country Country
Super Fine mode is enabled only if the