Dell C1765nf Color Laser User Manual page 181

Reset Wireless (Dell C1765nfw Color Multifunction Printer only)
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network
settings are reset to their default values.
No* Does not reset the wireless setting.
Yes Resets the wireless setting.
NOTE:
This item is displayed when the Ethernet cable is disconnected and
TCP/IP
Purpose:
To configure TCP/IP settings. The change takes effect after the printer is turned off and then on.
Values:
IP Mode Dual Stack*
IPv4 Mode
IPv4 Get IP Address
IP Address
Subnet Mask
Gateway Address
Protocol
Purpose:
To enable or disable each protocol. The change takes effect after the printer is turned off and then on.
Values:
LPD Disable
Enable*
Port9100 Disable
Enable*
WSD Disable
Enable*
SNMP Disable
Enable*
E-Mail Alert Disable
Enable*
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
AutoIP* Automatically sets the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
DHCP Uses DHCP to set the IP address.
Panel Enables the IP address entered on the operator panel.
Manually sets the IP address allocated to the printer.
Manually sets the subnet mask.
Manually sets the gateway address.
Disables the Line Printer Daemon (LPD) port.
Enables the LPD port.
Disables the Port9100 port.
Enables the Port9100 port.
Disables the Web Services on Devices (WSD) port.
Enables the WSD port.
Disables the Simple Network Management Protocol (SNMP) UDP port.
Enables the SNMP UDP port.
Disables the E-Mail Alert feature.
Enables the E-Mail Alert feature.
is set to .
Wi-Fi On
Understanding the Printer Menus
179