Dell C1765nf Color Laser User Manual page 43

Manual SSID Setup
NOTE:
A Password is required to enter
password you specified, and press the
1 Press the
(Menu) button.
2 Press the button until System appears, and then press the
3 Press the
button until Admin Menu appears, and then press the
4 Press the button until Network appears, and then press the
5 Press the button until Wireless Setup appears, and then press the
6 Press the button until Manual Setup appears, and then press the
7 Enter the SSID, and then press the
8 Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then press
(Set) button.
the
If you select Infrastructure, proceed to step 9.
If you select Ad-hoc, proceed to step 10.
9 Select the encryption type from No Security, Mixed mode PSK, WPA-PSK-TKIP, WPA2-PSK-AES, or
WEP.
If you do not set security for your wireless network:
• Press the button until No Security appears, and then press the
To use Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
Press the button until Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES appears, and then
a
press the (Set) button.
Enter the passphrase, and then press the
b
NOTE:
A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric
characters. It may be described as a key on some access points or routers. For details, refer to the manual supplied with
the access point or router.
To use WEP encryption:
Press the button until WEP appears, and then press the
a
Enter the WEP key, and then press the
b
Press the button to highlight the desired transmit key from WEP Key 1 to WEP Key 4, and then press
c
the (Set) button.
Proceed to step 11.
10 Select the encryption type from No Security or WEP.
If you do not set security for your wireless network:
• Ensure that No Security appears, and then press the
To use WEP encryption:
Press the button until WEP appears, and then press the
a
Enter the WEP key, and then press the
b
Press the button to highlight the desired transmit key from WEP Key 1 to WEP Key 4, and then press
c
the (Set) button.
11 The Restart System screen appears and the printer is rebooted, wireless LAN connection setting is completed.
when
Admin Menu Panel Lock Set
(Set) button.
(Set) button.
(Set) button.
(Set)button.
(Set) button.
is set to
Enable
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Connecting Your Printer
. In this case, enter the
41