Loading Print Media When Manual Duplex Printing; When Using The Multipurpose Feeder (Mpf) - Dell C1765nf Color Laser User Manual

Loading Print Media When Manual Duplex Printing

NOTE:
When printing on curled paper, straighten the paper and then insert it into the feeder.
When you start manual duplex printing, the instruction window appears. Note that the window cannot be reopened
once it is closed. Do not close the window until duplex printing is complete.
Manual duplex printing can be done using the MPF or PSI.

When Using the Multipurpose Feeder (MPF)

1 First print the even pages (rear sides).
For a six page document, rear sides are printed in the order of page 6, page 4, then page 2.
Ready / Error LED blinks and the message appears on the operator panel when the even pages finish printing.
2 After the even pages are printed, remove the paper stack from the output tray and set them as they are (with the
blank side facing up) into the MPF.
NOTE:
Warped or curled prints can cause paper jams. Straighten them before setting them.
NOTE:
Printing on both sides of the paper is not possible if the document consists of various sizes of papers.
3 Ensure that Insert Output to Tray Press
press the (Set) button. Print pages in the order page 1 (rear of page 2), page 3 (rear of page 4), then page 5
(rear of page 6).
224
Loading Print Media
to Continue Printing is highlighted, and then