Dell C1765nf Color Laser User Manual page 115

Printer Settings
The Printer Settings tab contains the System Settings, Secure Settings, Copy Defaults, Copy Color Balance, Copy
Settings, Scan Defaults, Fax Defaults, and Fax Settings pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
*1
Power Saver Timer - Sleep
Power Saver Timer - Deep
Sleep
Auto Reset
Panel Select Tone
Panel Alert Tone
Job Tone
Alert Tone
Out of Paper Tone
Auto Clear Alert Tone
All Tones
Job Time-Out
Panel Language
Disable printing with larger
*2
paper size
Auto Log Print
*3
mm/inch
*1 Enter 5 in Power Saver Timer - Sleep to put the printer in the power saver timer mode five minutes after it finishes a job. This uses less
energy, but requires more warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you
notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum
warm-up time. Select a value between 5 and 30 minutes for the power saver timer mode if you want a balance between energy
consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver timer mode when it receives data from the computer. You
can also return the printer to the standby mode by pressing any button on the operator panel.
*2 Disable printing with larger paper size is available only in the Dell Printer Configuration Web Tool and the Tool Box.
*3 The default for mm/inch varies depending on country-specific factory default.
Specifies the time taken by the printer before it enters the power saver timer mode 1 after it
finishes a job.
Specifies the time taken by the printer before it enters the power saver timer mode 2 after it goes
into the power saver timer mode 1.
Specifies the time taken by the printer before it automatically resets the settings for Copy, Scan, or
Fax on the operator panel to the defaults when no additional settings are made.
Sets the volume of the tone that is emitted when the operator panel input is correct, or disables
the tone.
Sets the volume of the tone that is emitted when the operator panel input is incorrect, or disables
the tone.
Sets the volume of the tone that is emitted when a job is complete, or disables the tone.
Sets the volume of the tone that is emitted when a problem occurs, or disables the tone.
Sets the volume of the tone that is emitted when the printer runs out of paper, or disables the
tone.
Sets the volume of the tone that is emitted 5 seconds before the printer performs auto clear, or
disables the tone.
Sets the volume of all the alert tones, or disables all the tones.
Specifies the amount of time that the printer waits for data to arrive from the computer. The print
job is cancelled if it times out.
Used to set the language on the operator panel.
Specifies whether to print jobs if the paper set in the tray of the printer is larger than the paper
size set in the printer driver (the paper size does not have to match).
Specifies if a job history needs to be printed after every 20 jobs.
Specifies the measurement unit displayed after the numeric value on the operator panel.
Dell™ Printer Configuration Web Tool
113