What If I Have A Digital Subscriber Line (Dsl) - Dell 946 User Manual

User guide
Table of Contents

Advertisement

1.
Connect a phone cord from the FAX connector (
telephone wall jack.
2.
Remove the protective plug from the PHONE jack connector (
3.
Connect a phone cord from the computer modem to the PHONE jack connector (
connector).
4.
Connect a phone from the computer modem to a telephone.
NOTE:
If the phone communication is serial in your country (such as Germany, Sweden, Denmark,
Austria, Belgium, Italy, France, and Switzerland), you must remove the blue plug from the PHONE jack
connector (
- right side connector), and insert the supplied yellow terminator for your fax to work
correctly. You will not be able to use this port for additional devices in these countries.

What if I Have a Digital Subscriber Line (DSL)?

DSL delivers digital data to a computer through a telephone line. Your printer is designed to work with
analog data. If you are faxing over a telephone line connected to a DSL modem, install a DSL filter to avoid
interference with the analog fax modem signal.
NOTE:
ISDN (integrated services digital network) and cable modems are not fax modems and are not
supported for faxing.
1.
Connect the DSL filter to an active telephone line.
2.
Connect the printer directly to the output of the DSL filter.
- left side connector) on the printer to the
- right side connector).
- right side

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

946 all in one printer

Table of Contents