Table of Contents
Advertisement
1.
Connect a phone cord from the FAX connector (
telephone wall jack.
2.
Remove the protective plug from the PHONE jack connector (
the printer.
3.
Connect a phone cord from the telephone to the computer modem.
4.
Connect a phone cord from the computer modem to the PHONE jack connector (
connector) on the printer.
NOTE:
If the phone communication is serial in your country (such as Germany, Sweden, Denmark,
Austria, Belgium, Italy, France, and Switzerland), you must remove the blue plug from the right
connector (
), and insert the supplied yellow terminator for your fax to work correctly. You will not
be able to use this port for additional devices in these countries.
What if I Have a Digital Subscriber Line (DSL)?
DSL delivers digital data to a computer through a telephone line. Your Dell Photo AIO Printer 964 is designed
to work with analog data. If you are faxing over a telephone line connected to a DSL modem, install a DSL
filter to avoid interference with the analog fax modem signal.
1.
Connect the DSL filter to an active telephone line.
2.
Connect the printer directly to the output of the DSL filter.
NOTE:
Do not install any splitters between the DSL filter and the printer. Contact your DSL service
provider if you need more help.
NOTE:
ISDN (integrated services digital network) and cable modems are not fax modems and are not
supported for faxing.
- left side connector) on the printer to the
- right side connector) on the back of
- right side
Advertisement
Table of Contents
